Skip to product information

Weld On 1963-1964 Ford Falcon Front Mustang II IFS Conversion Kit

$2,199.99 
MUSTANG II FRONT IFS 
 
INCLUDES:
 
7-GAUGE STEEL WELD ON CROSS MEMBER WITH BOXING PLATES (NOT UNIVERSAL VEHICLE SPECIFIC)
UPPER CONTROL ARMS (WITH BALL JOINTS)
LOWER CONTROL ARMS (WITH BALL JOINTS)
HEAVY DUTY FRONT COIL SPRINGS 375LB. SPRING RATE
GAS CHARGED FRONT SHOCKS
MANUAL RACK AND PINION STEERING
STAINLESS STEEL BRAIDED POWER STEERING HOSE KIT
EXTENDED TIE ROD ENDS
RACK BOLTS AND NUTS 
RACK BUSHINGS 
RACK SPACERS
 
ALSO INCLUDED:
 
MUSTANG II FRONT DISC BRAKE KIT 
QTY. 2 11" VENTED ROTORS 7/8" THICK BOLT PATTERN 5X4.50 
QTY. 2 GM METRIC CALIPERS WITH BRAKE PADS
QTY. 2 FORGED 2" DROP SPINDLES (USING DROP SPINDLES WILL PLACE THE FRONT END HEIGHT TO STOCK HEIGHT)
QTY. 2 FORGED CALIPER BRACKETS WITH HARDWARE
QTY. 2 STAINLESS STEEL BRAIDED BRAKE HOSES 16" 10MM BANJO BOLT 
QTY. 2 GREASE SEALS
QTY. 2 INNER BEARINGS
QTY. 2 OUTER BEARINGS
QTY. 2 CASTLE NUT WASHERS
QTY. 2 CASTLE NUTS WITH COTTER PINS
QTY. 2 DUST CAPS
 
 
PROFESSIONAL INSTALLATION RECOMMENDED. NO INSTRUCTIONS INCLUDED.